Computer-controlled Shape-tacking Machine with Full-rotary 3-fold Capacity Hook (For heavy-weight materials with intermediate presser)
[ Sewing area : 60 mm (L) × 100 mm (W) ]
The following features promise improved sewing capabilities for extra heavy-weight materials: A high-power, direct-drive motor that drives the needle with increased material-penetrating force; a higher-torque stepping motor that increases the feed efficiency, and a pneumatic work clamp that increases the material clamping force.
The sewing pattern can be changed with ease
With its new electronic feed system, the operator can select and use the sewing pattern entered. When changing a sewing pattern, the conventional mechanical bartacking machine requires the replacement of a feed cam. Since the new electronic machine no longer uses a feed cam, this operation is no longer necessary and costs are substantially saved.
With the handy PGM-7B programming device (optional), sewing patterns can be programmed on the main unit of the machine.
The Juki LK-1940 Series demonstrates a high-speed sewing capability of up to 2,200 sti/min for dramatically increased productivity.
The Juki LK-1940 Series is equipped as standard with a full-rotary 3-fold capacity hook. The hook reduces the frequency of the bobbin thread replacement, enhancing efficiency in sewing with thick thread.
The machine offers improved seam quality and sewing capabilities when sewing heavy-weight or extra heavy-weight materials.
The following features promise improved sewing capabilities for extra heavy-weight materials: A high-power, direct-drive motor that drives the needle with increased material-penetrating force; a higher-torque stepping motor that increases the feed efficiency, and a pneumatic work clamp that increases the material clamping force. Adoption of JUKI’s unique 3-fold capacity hook and a profound knowledge of sewing grounded on years of extensive sewing research help eliminate sewing problems and improve seam quality.
Standard device for G type or Z type. Needle thread feeding device: Feeds an adequate amount of needle thread in advance to prevent slippage from the needle when using bonding thread or the like. Semi-rotary tension: Applies higher tension on the needle thread.
The needle hole guide for the Z type machine is optimally suited for the sewing of seatbelts and ensures seams of extremely consistent quality.
Higher lift of the feeding frame (max: 25mm) enables easy placement of a material on the machine.
|Model Series||Juki LK-1940 Series|
|Model Number||Juki LK-1941ZA||Juki LK-1942HA||Juki LK-1942GA||Juki LK-1942ZA/5050|
|Application||For extra heavy-weight materials||For heavy-weight materials||For extra heavy-weight materials||For seatbelts|
|Max. sewing speed||2,200sti/min (when stitch length is 3mm or less) ※1|
|Sewing area||60mm (L)×100mm (W)|
|Needle bar stroke||41.2mm|
|Lift of the feeding frame||Max. 25mm|
|Lift of the intermediate presser||—||18mm|
|Stroke of intermediate presser||—||Standard 4mm (0mm and 4～10mm)|
|Heat cutter||Provided as standard||Option||Provided as standard (needle/bobbin thread separate cutting method)|
|Thread that can be trimmed||Synthetic only: #8～#1 B92～B277 30/3～8/3||#30～#8 B46～B92 60/3～30/3||#8～#2 B92～B207 30/3～10/3||Synthetic only: #8～#1 B92～B277 30/3～8/3|
|Needle (at the time of delivery)||DP×17 (#25) #24～#26||DP×17 (#18) #18～#20||DP×17 (#23) #21～#23||DP×17 (#25) #24～#26|
|Hook||Full-rotary 3 fold-capacity hook ※2|
|Feed motion work clamp foot||R-theta intermittent feed|
|Number of stitches that can be stored in memory||Max. 10,000 stitches|
|Number of patterns that can be input||64 patterns|
|Enlarging/Reducing facility||20～200% (1% step), by increasing/decreasing the stitch length|
|Bobbin thread counter||Provided as standard|
|Lubrication||Centralized oil wick lubrication|
|Lubricating oil||JUKI New Defrix Oil No.2 (equivalent to ISO VG32)|
|Compressed air and air consumption||0.5MPa (5kgf/cm2) , 1.3Nℓ/min|
|Sewing machine motor||550W compact AC servomotor (direct-drive system)|
|Power consumption||Single-phase, 3-phase 600VA|
|Weight||Machine head (include motor) 46kg, Control box 16.5kg||Completed-product 110kg|
|Heater unit 3.5kg||—|
For all Industrial Sewing Machine Spare Parts, Needles & Accessories, click the link below to our Parent company, College Sewing Machine Parts Ltd, the UK’s largest Industrial Sewing Machine Spare Parts Stockist. Juki Industrial Parts Agents, sewing machine parts for the Juki LK-1940 Series
Just fill out the form below with details of the machine on offer and we will see if we can beat or match the price.