Juki MH-484-5(4)

1-needle, Double Chainstitch Differential-feed Machine With automatic thread trimmer

Company Name

Your Name (required)

Telephone Number (required)

Your Email (required)

Postcode (required)

Your Message

The machine comes with a thread spreading mechanism and an adjustable needle guard to prevent stitch skipping. The thread clamp mechanism, tension release mechanism and needle thread draw-out mechanism enable the machine to leave thread of a uniform length after thread trimming, and prevent slip-off of the needle thread. All of these mechanisms contribute to upgraded sewing.

The machine finishes beautiful seams in elastic and light-weight materials. Furthermore, the differential-feed can be adjusted with the simple operation of a lever, thereby enabling the machine to respond to the requirements of many different kinds of sewing.

Change of sewing method with a simple lever operation.
The sewing method can be alternated between stretch stitching and shirr stitching with the simple operation of a lever. This lever is also used to adjust the differentialfeed ratio.

The machine is best-suited for sewing elastic materials.
The differential-feed is the best-suited feeding device when sewing elastic materials including double-jersey or light-weight materials such as satin or georgette. Beautiful, elastic seams are created, while puckering, thread breakage and thread fraying are all prevented.

The machine is capable of gathering and partial shirring.
A gathering attachment (S060), intermittent gathering attachment (S061) and partial shirring device (PF5) are optionally available to enable the machine to perform consistent gathering and partial shirring. Replaceable gauges such as the gauge for light-weight materials and the urethane feed dog are prepared in accordance with the applications of the machine.

Model Number Juki MH-481 Juki MH-481-5(4) Juki MH-484 Juki MH-484-5(4) Juki MH-486-5
 Feed system  Bottom-feed   Differential-feed   Bottom and variable top-feed
 Max. sewing speed  5,500rpm   4,500rpm
 Stitch length  1~4mm  Main feed: 1~4mm
Differential-feed: 1~5.6mm
 Top-feed amount  – 0~7mm
 Differential-feed ratio  –  Max. gathering stitching 1: 3 
(standard 1: 1.5) 
Max. stretch stitching 1: 0.5
 Lift of the presser foot  By hand: 5mm, By knee: 10mm   By hand: 5mm, By knee: 7mm
 Needle bar stroke  30mm  33mm
 Needle (at the time of the delivery)  TV × 7 (#11) #9~#18   TV × 7 (#11) #9~#21
 Stitch length adjustment  By dial
 Safety stitch  Condensation stitch/reverse stitching (by feed lever)
 Looper system  Inclined crank
 Looper stroke  21.5mm
 Looper stroke of the front and rear  2.1~3.3mm  2.1~3.3mm
 Speed control  –  ✽(1)  –  ✽(1)  ✽(1)
 Lubrication  Automatic
 Lubricating oil  JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
 Motor output  –  750W  –  750W
 Power requirement  –  Single-phase, 3-phase  –  Single-phase, 3-phase
 Power consumption  –  Rating 425VA  –  Rating 425VA

For all Industrial Sewing Machine Spare Parts, Needles & Accessories, click the link below to our Parent company, College Sewing Machine Parts Ltd, the UK’s largest Industrial Sewing Machine Spare Parts Stockist. Juki Industrial Parts Agents, sewing machine parts for the Juki MH-484 / Juki MH-484-5(4)

Juki MH-484 / Juki MH-484-5(4) Spare Parts

Just fill out the form below with details of the machine on offer and we will see if we can beat or match the price.

Competitor Web Address (URL) (required):

Price Quoted (required):

Details of promotions (required):

Your Name (required):

Your Telephone Number(required):

Your Email (required)

Copy of quotation (if applicable)