Juki MOL-254

Automatic 2-Needle Belt-Loop Attaching Machine

Company Name

Your Name (required)

Telephone Number (required)

Your Email (required)

Postcode (required)

Your Message

The Juki MOL-254 machine time is 1.2 seconds per belt-loop, which ensures increased productivity. The feed mechanism incorporates a computer-controlled X-Y method to allow the operator to change the number of stitches and sewing sizes.

The Juki MOL-254 machine time is 1.2 seconds per belt-loop (with 28 stitches).
The new Juki MOL-254 machine head specifically developed for belt-loop attaching machines runs at a maximum sewing speed of 2,500rpm and is equipped with a direct-drive system that improves start up performance and shortens sewing time. The belt-loop feeding device is now provided with a halfway standby capability for subsequent belt-loops, and its faster belt-loop supply action shortens the time required for supplying belt-loops and helps speed up the machine time to 1.2 seconds per belt-loop (with 28 stitches).

With the improved consistency in belt-loop supply action and re-try capability, the machine down time is substantially reduced.
Belt-loops are fed out by the conventional gear-roller feeding mechanism and also drawn out by the new drawing mechanism on the clamp device. Supported by these two mechanisms, the folding fork catches “curled” or “creased” belt-loops every time and supplies them to the head. In addition, the sensor of the clamp device detects the presence/absence of belt-loops. If it detects a faulty belt-loop feed, the clamp device automatically repeats the clamping action. Since the operator doesn’t have to operate the set-back switch, less time is lost.

Model Number Juki MOL-254
Machine head  Computer-controlled, 2-needle, lockstitch bartacking machine
Max. sewing speed  2,500rpm
Thread take up  Link type
Needle bar stroke  45.7mm
Thread  Spun thread, cotton thread #50#30, B33B46, Nm=120/360/3
Needle (at the time of delivery)  DP17 (#21) #19#21
Hook  Horizontal-axis 1.8 fold-capacity shuttle hook
Lift of the presser foot  21mm
Number of stitches  28, 36, 42 (selectable on the operating panel)
Needle gauge  4070mm (1-37/64″2-3/4″)
Bartacking length  722mm (9/32″55/64″)adjustable in increments of 0.1mm
Bartacking width  13.2mm (3/64″1/8″)adjustable in increments of 0.1mm
Number of pieces of bartacking data
that can be stored in memory
 9 (99 patterns if optional ROM is added)
Belt-loop width  920mm (23/64″25/32″)
Finished length of belt-loop  4878mm (1-57/64″3-5/64″)
Machine time  1.2 sec./belt-loop (28 stitch)
Positioning of the front hook  Driven by motor
(the distance between the hook can be established in increments of 0.01mm)
Bobbin winder  Electric type (provided as standard)
Lubrication  Centralized oil wick lubrication (machine head)
Lubricating oil  JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Power requirement and
power consumption
 Single-/3-phase, 350VA
Compressed air and air consumption  0.5MPa (5kgf/cm2), 32NR/min
Total weight  230kg
Dimensions  1,200mm (W)800mm (D)1,350mm (H: in its lowest end)
Height of the top surface of the throat
plate as from the floor surface
 9201,250mm (provided with the adjustable stand capability)

For all Industrial Sewing Machine Spare Parts, Needles & Accessories, click the link below to our Parent company, College Sewing Machine Parts Ltd, the UK’s largest Industrial Sewing Machine Spare Parts Stockist. Juki Industrial Parts Agents, sewing machine parts for the Juki MOL-254

Juki MOL-254 Spare Parts

Just fill out the form below with details of the machine on offer and we will see if we can beat or match the price.

Competitor Web Address (URL) (required):

Price Quoted (required):

Details of promotions (required):

Your Name (required):

Your Telephone Number(required):

Your Email (required)

Copy of quotation (if applicable)