Lockstitch, Automatic Welting Machine (for straight pockets with flaps)
The Juki APW-895 machine supports the sewing of straight pockets (with flaps) on suits, jackets and pants. Double-/single-welt sewing can be changed over by the simple touch of a key on the operation panel.
- The “direct-drive motor”, which transfers the motor power to the machine with no energy loss, not only offers economical benefits due to the power reduction, but also reduces the machine’s vibration and operating noise, thereby helping reduce operator fatigue.
- The Juki APW-895 machine head is provided with a semi-dry head to eliminate staining with oil from the frame (the needle bar part).
In addition to the high-speed machine head with a maximum speed of 3,000 sti/min, faster movement (jump and forwarding) of the clamp foot achieves a shorter machine time.
Power consumption is substantially reduced
The reduced energy consumption of the Juki APW-895 ensures superior power-conservation and cost effectiveness. The adoption of a direct-drive system (compact AC servomotor) with superb energy-transfer properties cuts the average power consumption by 75% compared with the forerunner of the Juki APW-895. The power consumption during standby is reduced by as much as 90%.
Time required for setup changing is substantially shortened
The Juki APW-895 machine is equipped with a simple gauge changing mechanism which enables the changing and adjustment of the position of the hook driving shaft saddle from the top of the bed without tilting the machine head. The time required to change a needle gauge is less than a half of that required by conventional machines.
The position of the folding plate and needle does not change even when double-/single-welt sewing is changed over. This means that the folding plate does not need any adjustment.
The Juki APW-895 machine is provided as standard with a micro-adjusting function for adjusting the clamp foot position. This enables both accurate and quick adjustments of the welting width.
Increased sharpness of the center knife
An independently driven (speed can be changed) stepping motor is adopted for the center knife. The center knife therefore remains unaffected by the sewing speed and cuts more sharply and cleanly. In addition, the knife shape is improved to prevent bending and demonstrates increased sharpness when an elastic material is being sewn.
|Model Number||Juki APW-895||Juki APW-896|
|Flap type||Rectangular flap||Rectangular / Slanted flap|
|Sewing speed||Max. 3,000 sti/min (1,0003,000 sti/min)*|
|Kind of welts|| Parallel double welt, parallel single welt
| Parallel double welts, parallel single welts,
slanted double welts, slanted single welts,
trapezoidal sewing (with/without flaps)
|Stitch length||Standard 2.5mm (2.03.4mm)|
| Stitch length
| Condensation stitching: Standard 1.0mm (0.51.5mm)
Back-tack stitching: Standard 2.0mm (0.53.0mm)
*Changeable between condensation / back tack stitching
| Corner-knife cutting
|Mechanical adjustment||Electronic adjustment|
|Needle||ORGAN DP × 17 Standard #16 (#14#18), SCHMETZ 190R Standard #100 (#100#110)|
|Thread||SPUN #60 (recommend)|
|Hook||Vertical-axis 1.7-fold capacity hook|
| Number of independent
|99 patterns (999 patterns when a CF memory card is used)|
| Number of cycle
| Number of alternate
|Machine head||2-needle, lockstitch machine (LH-895)|| 2-needle, lockstitch machine with organized
split needle bar (LH-896)
|Cloth feeding system||Driven by a stepping motor|
|Power requirement||Single-phase 200240V, 3-phase 200380V 50Hz / 60Hz|
| Compressed air
|0.5MPa, 40dm3/min (ANR)|
(Width 1580mm = Stacker included) (Height 1800mm = Thread stand included)
|Model name||With / Without
(corner knife and center knife)
|Sewing length (welt length)||Needle gauge (mm)|
|APW-895S||Without||Min. 18mmMax. 220mm (settable in increments of 0.1mm)||8, 10, 12, 14, 16, 18, 20|
When a solenoid valve is used: Min. 21mm
*For a needle gauge width of 14mm or more, the minimum sewing length is 50mm.
|APW-895L||Without||Min. 18mmMax. 300mm (settable in increments of 0.1mm)||22, 24, 26, 28, 30, 32|
|With||Min. 50mmMax. 250mm (settable in increments of 0.1mm)|
|APW-896||Without||Min. 18mmMax. 220mm (settable in increments of 0.1mm)||8, 10, 12, 14, 16, 18, 20|
|With|| Needle gauge 12mm or less: Min. 21mmMax. 220mm
Needle gauge 14mm or more: Min. 50mmMax. 220mm
For all Industrial Sewing Machine Spare Parts, Needles & Accessories, click the link below to our Parent company, College Sewing Machine Parts Ltd, the UK’s largest Industrial Sewing Machine Spare Parts Stockist. Juki Industrial Parts Agents, sewing machine parts for the Juki APW-895
Just fill out the form below with details of the machine on offer and we will see if we can beat or match the price.