Juki AE-200ALD

Edge Control Seamer (Pin tuck type)

JukiAE-200ALA

Company Name

Your Name (required)

Telephone Number (required)

Your Email (required)

Postcode (required)

Your Message

The Juki AE-200ALD edge control seamer is now launched. The Juki AE-200ALD machine is configured with JUKI’s unique sensor and manipulator-control mechanisms allowing inexperienced operators to join materials with defferent curves” with great finesses matching the finished seam quality of highly skilled operators. Sewing specifications can be quickly ond accurately adjusted via touch panel to meet the requirement of various design changes and which helps operators join materials nimbly and skillfully while enhancing productivity even in sewing processes for custom-designed articles in small lots.

High-quality joining of materials
The Juki AE-200ALD sewing machine is applicable to the sewing of materials with different curves and different-in-kind materials.

  • It is necessary for the joining of materials with beautiful textures added to carry out sewing of the materials and aligning their ends with notches simultaneously. The Juki AE-200ALD allows, through by its unique techniques, inexperienced operators to perform this difficult and skill-requiring process simply by placing the materials on the sewing machine. The sewing machine enables control of shirring and stretching of materials on a section-by-section basis by dividing the sewing length into ten different sections at the maximum. As a result, high-quality and consistent joining of materials is enabled even if the materials have complicated curves. The manipulator is a JUKI unique device which enables accurate joining of materials by active pressure and rotation of the rollers.

Juki AE-200ALD Pin tuck type
The sewing machine is able to produce beautiful and equally-spaced pin tucks by installing the pin tuck device (40088621).

Model Number Juki AE-200ALA Juki AE-200ALD
 Application  Join materials type (medium-weight)  Pin tuck type
 Machine head  DLU-5498N-7 (exclusive machine head for AE-200A)
 Sewing speed  200~3,500sti/min*
 Max. stitch length  4mm
 Max. top-feed amount  8mm
 Lift of the presser foot  10mm
 Needle  DB×1(#11) #9~#18
 Sewing condition  (Seam allowance) 1~30mm
(Curve sewing) 100mmR or more
(Number of plies) Two or one
 Compressed air  0.5MPa
 Power requirement Power consumption  Single, 3-phase 200~240V/220W
 Dimensions  Untitled-1
 Total weight  135kg (when all options are installed)
PriceMatch

Just fill out the form below with details of the machine on offer and we will see if we can beat or match the price.

Competitor Web Address (URL) (required):

Price Quoted (required):

Details of promotions (required):

Your Name (required):

Your Telephone Number(required):

Your Email (required)

Copy of quotation (if applicable)